Whiteside (610)

1/2"SH, 1/2"CD, 1-1/2"CL Product Description These spiral bits offer state-of-the-art results in flush trimming. Made from solid carbide, each bit contains up cut and down cut flutes and is tipped with...

The "ULTIMATE" Flush Trim Bit has a compression design to provide the ultimate cut when using templates. These bits leave a crisp, clean edge on both the top and bottom...

1/4"SH, 1/8"R, 1/2"CL Product Description Roundover bits provide a curved edge to your workpiece and are the most popular type of edge forming bit.

1/2"SH, 7/8"CD, 1-1/8"CL Product Description  The "ULTIMATE" Flush Trim Bit has a compression design to provide the ultimate cut when using templates. These bits leave a crisp, clean edge on...

1/4"SH, 1/8"R, 7/16"CL Product Description Extra small brass pilot (5/32” dia.) allows these bits to roundover edges on finely detailed workpieces with intricate contours, tight confines, and narrow openings. These...

1/2" SHANK Product Description Change your Rabbet depth by changing the bearing! This 1/2" set includes all eight bearings to make 1/8”, 3/16”, 1/4", 1/2", 7/16”, 3/8”, 5/16”, and flush...

1/2"SH, 1/4"R, 1-1/4"CD Product Description Bowl and Tray bits were designed as an alternate cutting shape to the traditional Round Nose. These bits have a flat bottom so that ridges...

1/4"SH, 1/4"CL Product Description Made from solid carbide, these bits are perfect for flush trimming veneers or laminates. They are designed with a single flute and solid carbide pilot to...

1/2"SH, 1/2"CD, 2"CL Product Description Providing state-of-the-art results in flush trimming. The bit uses a double ball bearing pilot to run against your project template while the up cut flutes...